The groundbreaking DC7 has a one-inch (25,4mm) profile and weighs 1.1 pound (500 grams) thanks to the pure 2-stage switch-mode technology inside. The profile may be low but the power ratings are certainly not – the DC7 puts out a maximum of 48W and allows the user to connect multiple high-current effects such as devices from Effectrode, Line 6 and Eventide without noise of any kind.

SOL is the ultimate solution for bringing life to a small to medium-sized pedalboard setup, especially if you are using power-hungry pedals. SOL is the smallest mains-powered switch-mode power supply we make at CIOKS (no wall-warts here) and the no-frills design plus massive power will leave you free to focus on your creative spark.

CIOKS 8 Expander is our largest switch-mode power supply extender and it features 8 isolated outlets which each deliver 9V DC with 660mA. All eight outlets offer four selectable voltages (9V, 12V, 15V and 18V).

CIOKS 4 Expander is the perfect companion to CIOKS DC7 in case you would like four additional outlets with four selectable voltages on each tap (9, 12, 15 and 18V DC) which can each deliver 660mA at 9V DC. Simply connect CIOKS 4 Expander to your CIOKS DC7 via the courtesy 24V outlet and you are good to go.

CIOKS CRUX is the ultimate add-on to CIOKS DC7 if you are using a Neural DSP Quad Cortex, a Line 6 HX-series pedal or another power-hungry 9V or 12V multi-effects pedal. Simply connect the CRUX to the 24V outlet on DC7, set the correct voltage on CRUX, connect the appropriate CIOKS Flex cable from CRUX to your multi-effect pedal and you are good to go.

CIOKS was founded in year 1991 and the first product out was the Baby power supply. It was released for sale in August 1992. To mark our 20th anniversary, we’ve made one of most powerful and versatile power supplies for effect pedals on the market – CIOKS CIOKOLATE.

DC10 is a multi-output power supply for effect pedals based on a toroidal transformer. It has 10 regulated and well-filtered DC outlets configured in 8 isolated sections. With a total of 1.600mA it’s a perfect solution for bigger rigs with DC pedals only.

AC10 is part of our linear range of dedicated multi-output power supplies for effect pedals. AC10 features two powerful AC sections with 800mA and each offers voltages 9, 12 and 16V AC. If you have one or two pedals in your setup which requires an AC power source, AC10 is the right choice.