Accessories
The CIOKS linear range power supplies each come with a mounting bracket included but in case you lose it you can order a replacement. The bracket is mainly intended for mounting the power supply under Pedaltrain boards but can also be used to ease mounting of the power supply to another type of pedalboard or in a rack.
The CIOKS linear range power supplies each come with a mounting bracket included but in case you lose it you can order a replacement. The bracket is mainly intended for mounting the power supply under Pedaltrain boards but can also be used to ease mounting of the power supply to another type of pedalboard or in a rack. Brackets ordered separately will be sold as a set including all the screws, washers, stand-offs and a hex-key needed to mount the power supply using the bracket. You might also want to order a mounting bracket kit if you have an older version 1.0 of one of our power supplies but wish to mount it underneath one of the new Pedaltrain models.
Power supply models which are sold including a mounting bracket are: DC10, AC10 and the CIOKOLATE which has two brackets included.
We currently offer four bracket sets which can be ordered separately (see “Specifications”). All brackets we currently offer come as sets including all needed mounting hardware and not as bare brackets.
Power supply models which are sold including a mounting bracket are: DC10, AC10 and the CIOKOLATE which has two brackets included.
where the S stands for SHORT is the new bracket which can be used with the AC10 and DC10. These are easy to identify as they have four large holes in them. This bracket set with the included hardware can be used for power supply versions 1.1 and 1.2 and will work for mounting the power supply underneath the board on both the new Pedaltrain models (Classic and Novo) but also the older ones with two large holes in the back
Where the L stands for LONG is the mounting bracket set to be used with older version 1.0 power supplies. This bracket is longer and easily recognizable with three large holes and has an extra hole to mount the stand-off supporting the power supply in the back. The stand-off can be screwed directly to the power supply models 1.1 and 1.2 which has an extra hole especially made for this supporting stand-off while version 1.0 didn’t have this extra threaded hole.
Is the new set of brackets and mounting hardware for the CIOKOLATE. This set is included with each CIOKOLATE. You can use this mounting bracket set for CIOKOLATE version 1.1 to mount it underneath all the new Pedaltrain board models Classic, Novo or bigger but also with older PT-3 or PT-PRO. We have added two more holes in each of the two brackets so they now also easily can be used with the smaller classic 1 and 2 boards.
Is the mounting bracket kit which should be used if you have an older version 1.0 CIOKOLATE. It contains two longer brackets with an extra hole to fix the stand-off supporting the power supply in the back.
If you wish to mount a DC10, AC10 or the CIOKOLATE underneath an old Pedaltrain (one with two large holes in the back) you’ll need the included mounting bracket and hardware but also some taller feet we now sell in sets with just the feet and rivets as all the remaining mounting hardware is now included with each power supply.
set was sold for older version 1.0 power supplies where mounting of the power supply was different with top surface of the power supply was facing the pedalboard and not the floor.
Artists Who Chose The Power