Products
Future power
generation
CIOKS 4 adapter kit
CIOKS 4 is the perfect companion for CIOKS DC7 in case you would like four additional outlets with four selectable voltages (9, 12, 15 and 18V DC) which can each deliver 660mA at 9V DC.
Professional link
range
Professional
range
Standard Link
range
Schizophrenic Link
Nice power supply for medium pedal boards with 6 isolated outlets and a total of 1.000mA DC. Two outlets are configurable to 18V.
Big John Link
Nice power supply with 6 outlets of which two are powerful with 400mA each. Good choice for smaller rigs with two high current pedals like Eventides or big Strymons.
AC Rider Link
Powerful AC section with 9 or 12V AC, nice add-on with AC to another link power supply or a stand-alone for a small rig with one AC pedal e.g. Whammy.
Standard Flex
Cables
Type 1 – centre negative 5,5/2,1mm DC plug
Also calleded the BOSS standard. This Flex type should be used to power the vast majority of the pedals on the market like BOSS, TC Electronic, Strymon, Dunlop, MXR, Catalinbread, ZVex and many many more.
Type 2 – centre positive 5,5/2,1mm DC plug
This standard is less popular but also widely used in all Moogerfooger or Radial Tonebone pedals, a few Empress, Diamond and Kingsley pedals, the '69 Pedal, Soulbender or Octafuzz from Fulltone or older positive ground ...
Type 3 – centre negative 5,5/2,5mm DC plug
This is one of the Flex cables you need in order to power a Line6 Stomp from the CIOKS DC7.
Type 4 – centre positive 5,5/2,5mm DC plug
This Flex cable type should be used to power all Eventide Factor and H9 pedals, older 4-button modelers from Line 6 like the DL4,, some older 18, 24 or 40V Electro-Harmonix pedals and most of ...
Type 5 – tip positive 3,5mm jack plug
This black type 5 Flex cable with a 3,5mm mini jack plug should be used to power some older Electro-Harmonix, DOD, some Wah or RAT pedals, the KLON Centaur and many others.
Type 6 – 9V battery snap
The 9V battery snap on type 6 Flex cable should be used with 9V battery powered pedals which don’t have an adapter input socket e.g. vintage Wah pedals or some MXR or Roger Meyer fuzz ...
Type 7 – 2 pin DIN plug
This blue Flex cable can only be used to power one of the eight vacuum tube pedals from Electro-Harmonix which should be powered with 12V AC.
Special Flex
Cables
3-way daisy chain Flex – type 1
With this Flex cable you can power three pedals of one outlet. All three pedals will get the same voltage as stated on the outlet and have a 5,5/2,1mm centre negative power jack also called ...
Booster Flex – type 1 & 4
Use a single 9V or 12V outlet to power a low current 18V or 24V pedal. The pedal should not draw more than 50mA.
Extension Flex – black
With this Flex cable you can power three pedals of one outlet. All three pedals will get the same voltage as stated on the outlet and have a 5,5/2,1mm centre negative power jack also called ...
Open end Flex
Two cables which allow you to make custom length Flex cables. One with our standard RCA plug and the same cable type used on all the other Flex cables. The other is with round cable ...
Parallel adapter Flex – sand grey
Need more mA than a single outlet can provide. Use this Parallel adapter Flex to add currents from two same isolated outlets. Voltage and current rating of the outlets used must be exactly the same.
Series adapter Flex – white
This Series adapter Flex adds voltages of two isolated outlets used. If you need say 18 or 24V and want to choose the plug type and cable length to the pedal this is the way ...
Split adapter Flex – black
This Split adapter Flex allows you to power two pedals with the same voltage of a single outlet where you can choose the cable length and the plug type individually for each of the two ...
Split Flex – type 1
This Flex cable allows you to power two pedals of one outlet. Both pedals must be with 5,5/2,1mm centre negative input power socket which is also called the BOSS standard. Two cables go from the ...
Stack Flex – type 1 & 4
Adds voltages of two outlets used. This special Flex combines a series connection with a standard Flex in one cable. Available with type 1 black BOSS standard plug or the green type 4 mainly for ...
DC LINK CABLES
MAINS POWER CORDS
AND AC MAINS ADAPTER
Mains power cords
Two cables which allow you to make custom length Flex cables. One with our standard RCA plug and the same cable type used on all the other Flex cables. The other is with round cable ...
MECHANICAL
ACCESSORIES
Other mounting brackets
In case you are missing your bracket these are sold as kits separately. All CIOKS power supplies are now sold with all the needed hardware to mount them underneath a Pedaltrain board.