Very popular all-rounder with versatility and plenty of power. Premium choice with 10 outlets in 8 isolated sections for a bigger pedal board.

DC10 is a professional multi-output power supply for effect pedals. It has 10 regulated and well-filtered DC outlets configured in 8 isolated sections. With a total of 1.600mA it’s a perfect solution for bigger rigs with pedals only using a DC power source. Its three powerful sections with 400mA each will power pedals with special requirements like Strymons, Eventides, TC Electronic Nova-series pedals or TC Helicon pedals, Moogerfoogers, Radial Tonebone pedals or others without the need of special cables. Selectable with a switch DC10 offers voltages 9, 12 and 15V, and combined with the included Stack Flex or Series adapter Flex also 18 and 24V. The first 4 isolated outlets offering 4x100mA are perfect for standard 9V low current pedals.

    • 10 outlets configured in 8 isolated sections
    • Toroidal transformer with additional electromagnetic field shielding
    • 3 powerful DC sections with 400mA each
    • 15V option for Radial Tonebone pedals
    • Short circuit protection of all outlets
    • Advanced LED monitoring of each section
    • Temperature monitoring
    • 120 or 230V mains voltage operation
    • A total of 16 Flex cables included
    • Split Flex for powering two pedals of one outlet included
    • Stack Flex and Series adapter Flex for powering 18 or 24V pedals included
    • Compatible with Pedaltrain and Temple Audio pedalboards
    • Mounting bracket and all pedalboard mounting hardware included

    Outlet 1-4: 9V DC / 100mA each
    Outlet 5-6: 9 or 12V DC / 200mA each*
    Outlet 7-8: 9 and 12V DC / 400mA
    Outlet 9-10: 9 and 12 or 15V DC / 400mA
    * can be merged into a 400mA section

    Size: 158x98x35mm (excl. detachable rubber feet)
    Weight: 1,1kg

    Warranty period: 5 years worldwide

    Order number:
    DC10    CIOKS DC10 – Professional power supply for effect pedals with 10 outlets

    • CIOKS DC10 power supply
    • Mains power cord
    • 16 Flex cables:
      • Type 1 – black with 5,5/2,1mm centre negative DC plug x8
      • Type 2 – red with 5,5/2,1mm centre positive DC plug x1
      • Type 4 – green with 5,5/2,5mm centre positive DC plug x2
      • Type 5 – black with 3,5mm tip positive Jack plug x1
      • Type 6 – black with 9V battery clip x1
      • Split Flex type 1 – black, powers two pedals of a single outlet x1
      • Stack Flex type 1 – white/black, adds voltages of two outlets x1
      • Series Adapter Flex – white, adds voltages of two outlets x1
    • Pedalboard mounting hardware: mounting bracket, screws, washers, stand-off and hex key
    • Manual
    • Product sheet (drill guide)
    • Flex guide

    Mounting CIOKS DC10 or another CIOKS PRO power supply under Pedaltrain classic or novo

    This video shows how to mount any of our power supplies from the professional range under a Pedaltrain classic or novo pedalboard. The specific information about mounting the DC8 starts around 12:52 but you should see the whole video since the process is similar to the DC10.

    Mounting CIOKS DC10 or another CIOKS PRO power supply under a Templeboard

    This one shows how to mount CIOKS DC10 under a Templeboard. The procedure is exactly the same with our DC8 power supply.


    CIOKS News/Blog