Our Products

Flex cables

Showing 1–9 of 16 results

3-way daisy chain Flex – type 1

With this Flex cable you can power three pedals of one outlet. All three pedals will get the same voltage as stated on the outlet and have a 5,5/2,1mm centre negative power jack also called ...

Booster Flex – type 1 & 4

Use a single 9V or 12V outlet to power a low current 18V or 24V pedal. The pedal should not draw more than 50mA.

Extension Flex – black

With this Flex cable you can power three pedals of one outlet. All three pedals will get the same voltage as stated on the outlet and have a 5,5/2,1mm centre negative power jack also called ...

Open end Flex

Two cables which allow you to make custom length Flex cables. One with our standard RCA plug and the same cable type used on all the other Flex cables. The other is with round cable ...

Parallel adapter Flex – sand grey

Need more mA than a single outlet can provide. Use this Parallel adapter Flex to add currents from two same isolated outlets. Voltage and current rating of the outlets used must be exactly the same.

Series adapter Flex – white

This Series adapter Flex adds voltages of two isolated outlets used. If you need say 18 or 24V and want to choose the plug type and cable length to the pedal this is the way ...

Split adapter Flex – black

This Split adapter Flex allows you to power two pedals with the same voltage of a single outlet where you can choose the cable length and the plug type individually for each of the two ...

Split Flex – type 1

This Flex cable allows you to power two pedals of one outlet. Both pedals must be with 5,5/2,1mm centre negative input power socket which is also called the BOSS standard. Two cables go from the ...

Stack Flex – type 1 & 4

Adds voltages of two outlets used. This special Flex combines a series connection with a standard Flex in one cable. Available with type 1 black BOSS standard plug or the green type 4 mainly for ...